SNE Energy Information

Updated May 1, 2024

Plume joined the Small Network Equipment Voluntary Agreement (SNE VA) in 2020. This page provides information about the energy consumption of SNE sold directly to consumers by Plume since January 1, 2020. The power measurements herein represent the SNE devices typically configured for use in consumers’ homes, and measured in accordance with the test procedures as specified in the Voluntary Agreement. The energy use of an individual SNE device may vary.

MAKEMODELBASE TYPEFEATURESIDLE POWER (W)
PlumeSuperPod (PP203X)Advanced LNEGigE LAN(2), 2.4 GHz Radio LP, 5GHz Radio (20,40,80 MHz) LP(2), 5GHz MIMO (20,40,80 MHz) above 2x2 LP(2), 802.11n 256 QAM, Bluetooth, PCIe Gen 1 & 2 Base6.5
PlumeSuperpod AX (PP403Z)Advanced LNEGigE LAN, 2.5 GigE LAN Active, 2.4 GHz Radio LP, 5GHz Radio (20,40,80 MHz) LP, 5GHz Radio (160 MHz) LP, 5GHz MIMO (160 MHz) above 2x2 LP(2), 802.11n 256 QAM, Bluetooth, PCIe Gen 1 & 2 Base7.5
PlumeSuperpod 6E (PP603X)Advanced LNEGigE LAN, 2.5 GigE LAN Active, 5GHz Radio (20,40,80 MHz) LP, 5GHz MIMO (20,40, 80MHz) above 2x2 LP (2), 6GHz Radio (160 MHz) LP, 6GHz MIMO (160 MHz) above 2x2 LP(2), 2.4GHz Radio HP, 802.11n 256 QAM, Bluetooth, PCIe Gen 1 & 2 Base, AP 5K-10K DMIPS10.2
PlumeSuperpod Aon with WiFi 6 (PP523Z)Advanced LNEGigE LAN, 2.5 GigE LAN Active, 5GHz Radio (20,40,80 MHz) LP, 5GHz Radio (160 MHz) LP, 5GHz MIMO (160 MHz) above 2x2 LP(2), 2.4 GHz Radio HP, 802.11n 256 QAM, Bluetooth, PCIe Gen 1 & 2 Base7.7
PlumeSuperpod Aon with WiFi 6 and LTE (PP513Z)Advanced LNEGigE LAN, 2.5 GigE LAN Active, 5GHz Radio (20,40,80 MHz) LP, 5GHz Radio (160 MHz) LP, 5GHz MIMO (160 MHz) above 2x2 LP(2), 2.4 GHz Radio HP, 802.11n 256 QAM, Bluetooth, PCIe Gen 1 & 2 Base8.2

BASE TYPE KEY

SHORTCUTBASETYPE
Basic LNELocal Network Equipment that does not include Advanced LNE features
Advanced LNELocal Network Equipment (LNE) that incorporates multi-port routing, wireless access point, and/or VoIP functionality

FEATURE KEY

Note: A feature listed in the table above with a number following it indicates the number of ports or interfaces of that type supported by the device. For example, GigE LAN(2) indicates the device has two GigE LAN ports. If a number is not provided, it defaults to (1).

SHORTCUTFEATURE
GigE LAN1 Gigabit Ethernet port
2.5 GigE LAN Active2.5 Gigabit Ethernet port connected (active link)
2.4 GHz Radio LPWi-Fi 2.4 GHz radio with a conducted output power of less than 200 mW per chain up to 2x2
5 GHz Radio (20, 40, 80 MHz) LPWi-Fi 5 GHz radio up to 80 MHz channel bandwidth with a conducted output power of less than 200 mW per chain up to 2x2
5 GHz MIMO (20, 40, 80 MHz) above 2x2 LPAdditional allowance per RF chain above 2x2 MIMO at 5 GHz up to 80 MHz channel bandwidth with a conducted output power of less than 200 mW per chain
5 GHz Radio (160 MHz) LPWi-Fi 5 GHz radio at 160 MHz channel bandwidth with a conducted output power of less than 200 mW per chain up to 2x2
5 GHz MIMO (160 MHz) above 2x2 LPAdditional allowance per RF chain above 2x2 MIMO at 5 GHz at 160 MHz channel bandwidth with a conducted output power of less than 200 mW per chain
6 GHz Radio (160 MHz) LPWi-Fi 6 GHz radio at 160 MHz channel bandwidth with a conducted output power of less than 200 mW per chain up to 2x2
6 GHz MIMO (160 MHz) above 2x2 LPAdditional allowance per RF chain above 2x2 MIMO at 6 GHz at 160 MHz channel bandwidth with a conducted output power of less than 200 mW per chain
2.4 GHz Radio HPWi-Fi 2.4 GHz radio with a conducted output power of greater than or equal to 200 mW per chain up to 2x2
2.4 GHz MIMO above 2x2 HPAdditional allowance per RF chain above 2x2 MIMO at 2.4 GHz with a conducted output power of greater than or equal to 200 mW per chain
802.11n 256 QAMWi-Fi IEEE 802.11n at 2.4GHz supporting 256-QAM
BluetoothBluetooth
PCIe Gen 1 & 2 BasePCIe Interface Gen 1 & 2 Base (includes first lane)
AP 5K-10K DMIPSApplication Processor 5K-10K DMIPS